Large Data Port

There are two different designs for the Large Data Port. The original BC version, now called CS:L (club spec legacy) and what was R2.0 and is now called CS:R (club spec revisited). The CS:R parts have been released in 3D format. If you are not familiar with the changes, or want 3D models of the CS:R parts, take a look at the DroidWiki article.
Click on the image to open a 3D .pdf version of the design.



There are no obvious ways of mounting the standard LDP designs. I have modified both of these designs to incorporate an edge on the back of the top part of the LDP that will mate with the top ring of the eggcrate frame. Click on the image to open a 3D .pdf version of the design.


this part ihas not been brought up to CS:R released version (yet)

You can download models in STEP AP203 (.stp) format in English (inch) units as well as in 3D.pdf format: click here.

Here is what a 3D printed version of the CS:R part looks like



 Home