I'm using the 10-24 threaded parts in the Shoulder Buttons and Shoulder Hydraulics (required by the R2BC part drawing). The 4-40 parts are used in my CS:R large data port and the 2-56 parts in my HoloProjector design to hold the bottom on.
Hot Melt Inserts
| Hot Melt Inserts provide a way to put threads into 3D printed parts. They come in a variety of sizes. I'm using the 10-24 threaded parts in the Shoulder Buttons and Shoulder Hydraulics (required by the R2BC part drawing). The 4-40 parts are used in my CS:R large data port and the 2-56 parts in my HoloProjector design to hold the bottom on. |
|
| Home |